Product advantage

1、 Quick disassembly and convenient movement

Except for connecting equipment such as screw conveyor and cement bin, all wiring of mobile mixing station does not need to be removed. It only needs 30 ton crane to cooperate, and can be removed and displaced in one day. During installation, if the ground is flat and solid, no foundation is required, and production can be carried out in place on the same day, which is very suitable for units with tight construction period requirements.

The mobile mixing station is equipped with tires and towing pins, which allow high speed up to 60 km / h when towing with trailer. The total weight of all equipment in the mobile mixing station is 23.5t, and all accessories are removed with the station at one time when the station is moved.

2、 Excellent mixing performance

The mobile mixing station adopts the forced double horizontal shaft mixer, which can achieve uniform mixing with short mixing time. For the dry, semi-dry, plastic and various proportions of concrete can complete a good mixing.

3、 High configuration, high reliability, precise measurement and convenient operation

The main reducer, measuring sensor and main electrical components of the control system of the mobile mixing plant are imported components, which not only greatly reduces the failure rate of the equipment, but also improves the measuring accuracy of the equipment.

The whole machine of mobile mixing station is controlled by computer, which can be operated automatically or manually. It is easy to operate and master. Dynamic panel display can clearly understand the operation of each component, and at the same time can store and print report data, which provides great convenience for production scheduling management.

technical parameter

Composition of mobile station

1. Chassis of the main engine: the chassis of the mixing main engine is in the form of cantilever, which includes the traction pin of the towing truck and the parking leg; the measurement scale of the mixer, cement and water admixture is placed on the chassis; the surrounding is equipped with the inspection walking platform, handrail, etc.

2. Control room: the control room is located at the bottom of the chassis of the main machine, which is equipped with the full-automatic control system of the mixing station. The control system is the same as that of the fixed mixing station. The control room is used as the front support point of the whole station in the working state, and the control room is folded up and stored in the air in the bracket during the transfer transportation; all its control lines do not need to be disassembled.

3. Aggregate batching and metering: this system is located at the back end of the mobile mixing station, and the upper part is aggregate (sand, stone) storage hopper, which can be divided into 2 or 4 grids. A heightening plate is set to increase the storage capacity, and the pneumatic door is opened in turn. Aggregate metering is a multiple material cumulative metering method. The bottom is equipped with a walking rear bridge and a frame leg for working.

4. Belt conveyor frame: the frame is a truss structure connecting the chassis of the main machine and the aggregate batching frame, with a belt frame inside; the main frame, belt frame and batching frame are integrated to form the main structure of the whole mobile mixing station.

5. Peripheral parts: they are cement bin and screw conveyor. The peripheral parts are integral parts no matter in operation or transportation, so they can be transported and disassembled as a whole without disassembly.

6. Mixing machine: JS type forced mixer is generally used, which can quickly and evenly mix the fluidity and dry hard concrete.